Installation of straight seam welding machine
1. Installation attention
(1) Please install this device in the level stable place
(2) In order to making the machine working more reliably, daytime please avoid working in the humidity above 90%, the multi-dusts, the high temperature 40℃ above, the easy condensation's place. And as well as the high frequency sources and chemicals place.
(3) Please use the suitable tools to connect wires, and don’t damage the inside copper wires.
(4) Please don’t drop the screw, iron filings, and other sundry into clamp to avoid the equipment damage
(5) When operating machine, in order to avoid the mechanical breakdown or the breakage, please by all means must one time only carry on a switch, please don’t change many switches or many buttons simultaneously, and cannot operate crudely.
(6) Machine should be far away from flammable, explosive, the corrosive goods and the fire sources, the vapor source, the strong magnetic field and so on when using.
(7) Please ensure the welder has a good ventilated condition, so it shouldn’t has a obstruction such as a wall around the machine 0.5m.
2. Power supply
(1) The using power supply should has air switch and breaker safeguard
(2) Rated input voltage 220V ±10%
(3) Machine must connect grounding
3. Staff protection
(1) Please more careful when welding, don’t clamp the hand by clamping plate
(2) Please don’t touch the welding position immediately after welding.
(3) Welder and operator must wear eye shield to avoid splash enter eyes or ultraviolet radiation burn